Cisco UCS C220 M3 Rack Server

The Cisco UCS C220 M3 Rack Server is designed for performance and density over a wide range of business workloads, from web serving to distributed database.

Compare

Description

The Cisco UCS C220 M3 Rack Server is designed for performance and density over a wide range of business workloads, from web serving to distributed database.

Additional information

Chassis

One rack unit (1RU) chassis

CPU

One or two Intel® Xeon E5-2600 v2 or E5-2600 series processor family CPUs

Chipset

Intel® C600 series chipset

Memory

16 slots for registered or unbuffered ECC DIMMs (RDIMMs or UDIMMs) or
load-reduced DIMMs (LRDIMMs)

Muilti-bit Error Protection

This server supports multi-bit error protection.

NIC

Embedded dual-port Intel i350 PCIe-based Gigabit Ethernet controller,
supporting the following:
■ Pre-Execution Boot (PXE boot)
■ iSCSI boot
■ Checksum and segmentation offload
■ NIC teaming

Expansion Slots

Two PCIe slots (on a riser card)
■ One full-height profile, half-length slot with x24 connector and x16 lane
■ One half-height profile, half-length slot with x16 connector and x8 lane

Internal Storage Device

Drives are installed into front-panel drive bays that provide hot-pluggable
access.
■ Small Form Factor (SFF) drives. Up to eight 2.5-inch SAS or SATA
hot-swappable hard disk drives (HDDs) or solid state drives (SSDs)
■ The server also contains one internal USB 2.0 port on the motherboard
that you can use with a USB thumb drive for additional storage
■ UCS Storage Accelerator are also available. These PCIe flash storage
devices provide independent high-speed storage.

Flash Drives

The server supports up to two internal 32 GB Cisco Flexible Flash drives (SD
cards).
The second SD card is blank and can be used to mirror the first SD card. It
can be used to protect the Hypervisor Partition with RAID1.

Reviews

There are no reviews yet.

Be the first to review “Cisco UCS C220 M3 Rack Server”

Your email address will not be published.